[Hot Item] 6V/1A, 12V/4A Autu Intelligent Battery Charger/Maintainer with LCD Display

TE4-0242 3.8A LCD display smart battery charger

Product Description
This model is multistep battery charger used for charging and float charge of
6V or 12V lead batteries. These may be the types AGM-CA/CA-GEL-MF-VRLA
with electrolyte solution or GEL.
The manufacture/reseller is not liable for damage caused by improper use. The device is not intended forcommercial use, only be used indoors or away from direct weather or water exposure.

TECHNICAL DATA

LCD display and blacklight
The body material is polycarbonat
Input voltage: 120V AC,60Hz
            220-240V,50HZ
Rated power: 60W Standby function<1w
4 different load levels (switchable by a button)
Level 1 : 7.3v /0.8A for 6v /1.2Ah -14Ah batteries
Level 2 : 14.4 v /0.8A for 12v /1.2Ah -14Ah batteries
Level 3 : 14.4 v /3.8A for 12v /14Ah-120Ah batteries
Level 4 : 14.7 v /3.8A for 12v /14Ah-120Ah batteries
Simple operation with only one mode button selection motocycle ,car cold and 6V mode .
With revial mode for 12v batteries
Ambient Temperature: 0*C to 40*C
Housing Protection type: IP 65

Max charging voltage :7.3V 6V batteries
14.7v (12v batteries)
Max charging current :0.8A ±10%
3.8A ±10%
Charging protection type : 6v lead -acid battery
1.2AH-14AH
12V lead-acid battery 1.2AH-120AH

Program 1 "6V" (7.3V/0.8A)
For charging 6V batteries with a capacity of less than 14Ah.
Press the program selection button 10, to select program 1. The symbol "6V" is displayed on the LCD. During
charging, the charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the
battery is fully charged, the condition display 8 shows 4 bars. The flashing stops and the charger automatically
switches to float charge.
Program 2 "12V" (14.4V/0.8A)
For charging 12V batteries with a capacity of less than 14Ah.
Press the program selection button 10, to select program 2. The symbol is displayed on the LCD. During
charging, the charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the
battery is fully charged, the condition display 8 shows 4 bars. The flashing stops and the charger automatically
switches to float charge.
Program 3 "12V" (14.4V/3.8A)
For charging 12V batteries with a capacity of between 14 Ah-120 Ah.
Press the program selection button 10, to select program 3. The symbol is displayed on the LCD. During
charging, the charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the
battery is fully charged, the condition display 8 shows 4 bars. The flashing stops and the charger automatically
switches to float charge.
Program 4 "12V"(14.7V/3.8A)
For charging 12V batteries with a capacity of between 14Ah-120Ah under cold conditions or for charging AGM
batteries.
Press the program selection button 10, to select program 4.

NOTE: This program may start with a minute delay. The symbol is displayed on the LCD. During charging,
the charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the battery is
fully charged, the condition display 8 shows 4 bars. The flashing stops and the charger automatically switches to
float charge.

Float charge
As described under program, this charger features the automatic float charge. Depending on the voltage drop of
the battery, caused by self-discharge, the appliance reacts with different charge currents.
The battery can remain connected to the charger for longer periods of time.