Product Details
Basic Info.
Model NO.
D1-80, CF-1025, CMF-1040, CF-1010
Type
Brake Pads
Material
Steel
Position
Front
Certification
ISO/TS16949, ISO13485, ISO9001
Classification
Disc
Drum Brakes Classification
Brake Shoe
Main Market
South America, North America, Eastern Europe, Mild East, Southeast Asia, Southern Europe
The Average Fiber Length
0.15--2.5mm
The Average Fiber Diameter
4-9um
Color
White or Greyish White
Softening Point
>1750temperature
pH
7
Shot Content;>120mesh
<20
Fiber Diameter
2-4um
Specific Gravity
0.25-0.45G/M3
Fiber Moisture
<0.1
Transport Package
PP and Paper Bags on Pallets
Specification
CF-1010, CF-1020, CF-1025, CF-1035
Trademark
Deyoute
Origin
Hebei, China
HS Code
680690000
Production Capacity
2000
Packaging & Delivery
Package Size
85.00cm * 55.00cm * 20.00cm
Package Gross Weight
25.000kg
Product Description
Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035)
Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :
| SiO2 | Al2O3 | Fe2O3 | Na2O+K2O |
| 45%-55% | 40-50% | 0.8%-1.0% | 0.2%-0.5% |
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
CERAMIC FIBER(CF-1025):
| Project | Index(%) |
| The average fiber length | 0.15--2.5mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.45g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <20 |
| Surface density(state of compression) | 0.13-0.20g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0--1mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.45-0.55g/m3 |
| Fiber moisture | ≤1.5 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <30 |
| Surface density(state of compression) | 0.25-0.40g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0.10--2.0mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.35g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <25 |
| Surface density(state of compression) | 0.25-0.35g/ cm³ |
Package:
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
It is made of high quality newsprint crushed, with moderate price and no environmental pollution. It is a high quality asbestos substitute, suitable for non-asbestos friction materials, especially for ceramic fiber and other mineral fiber reinforced friction materials.Cellulose fiber
Main components: Nature Cellulose
Characteristics and application:Easily dispersed, no need pre-open-processing, good cold-enhancing effect and high intensity, it can improve the intensity of the brake linings and used better than other products.
Recommendatory dosage: Brake drum: 5-20% ,Brake disc: 3-10%
Technology Indicators:
| Project | Indicators |
| Appearance | Gary White |
| Specific Gravity | 1.4g/ cm³ |
| Loose Density | 600-800 cm³/100g |
| Fiber length | 0.65-1.8mm |
| Surface density(state of compression) | 0.16-0.19g/ cm³ |
| 105ºC Volatiles | <10.9% |
| 800ºC Calcination | <0.9% |
| Fiber diameter | 3-12μm |
| P H | 5.1 |
| Main ingredients | H 7% C 41% O 52% |
Package:
10-12kg/bag packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Composite fibre:
Non-Asbestos Composite Mineral Synthetic Fibre(Composite Fiber)
Product Model: CF-1035,CF-1025
The fiber is made of mineral fiber, organic fiber and surface treatment agent. Length 1.0-3.5mm, the fiber has good dispersion, suitable for mixing with all kinds of mixer. Using this product cold type effect is good, especially suitable for cold type two step brake lining production process, use this product do not need to add organic fiber.
Technical Indicators:
| Project | Indicators |
| Specific Gravity | 2.25g/cm³ |
| Fiber length | 1.0-3.5mm |
| Loose density | 800-1100 cm³/100g |
| 105ºC Volatiles | <2.5% |
| Slag ball Content | >120mesh; < 2% |
| 800ºC Burn loss | 28-32% |
| Fiber diameter | 3-8μm |
| P H | 8-10 |
| Main ingredients | Mineral Fiber 70% Cellulose Fiber 30% |
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Crushed steel wool: mainly used for automotive brake pads and other friction materials;
Cut steel cotton fiber: can be used in construction concrete and other fields;
Steel wool long fiber: mainly used for civilian daily washing and industrial rust removal, decontamination, polishing, etc. Steel wool can also be used in powder metallurgy, refractory materials, conductive plastic products and other fields.
Cut steel cotton fiber: can be used in construction concrete and other fields;
Steel wool long fiber: mainly used for civilian daily washing and industrial rust removal, decontamination, polishing, etc. Steel wool can also be used in powder metallurgy, refractory materials, conductive plastic products and other fields.
STEEL WOOL FIBER
Technical Information Sheet
- General
2. Chemical Composition:
| C | Si | Mn | S | P |
| 0.07-0.12 | 0.07MAX | 0.8-1.25 | 0.03MAX | 0.03MAX |
3. Specification:D0-160, D1-80, AD1-80, 1-80, 3L-80, 3-60, Q4-80
4. Application:
| Classification | Specification | Range Of Application | Note |
| Steel wool Fiber | D0-160 D1-80 |
Brake shoes for motorcycle, car and light truck | It can be produced according to the standards and specifications required by users |
| AD1-80 1-80 |
Brake shoes for a midsize car | ||
| 3L-80 3-60 Q4-80 |
Brake shoes for heavy duty vehicles |
5. Packaging:
Using two paper and one plastic composite bag packaging, bag mouth suture seal, 25kg/ bag, can also according to customer requirements.
6.Industrial Safety and Environment Protection
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
- A safety data sheet will be made available on request
