![[Hot Item] Car Engine Oil Passage Cleaning Machine/Clean Lubrication System Reduce Engine](http://image.made-in-china.com/2f0j00ergCSqlDymod/Car-Engine-Oil-Passage-Cleaning-Machine-Clean-Lubrication-System-Reduce-Engine.webp)
- Overview
- Product Description
- Product Parameters
- Product Features
- Matters Needing Attention
- Factory Tour
- Trade Info
- FAQ
Basic Info.
Packaging & Delivery
Product Description
Car Engine Oil Passage Cleaning Machine/Clean Lubrication System Reduce Engine
Model: ATT-33LX
Based on the principle of high cycle physical oscillation, the special cleaning solvent equipped can not only effectively dissolve the oil sludge, but also provide the lubrication protection effect required by the oil. At the same time, the oil sludge, carbon deposit and other impurities attached to the lubrication system of the engine are removed, and the old engine oil inside the engine is sucked out by the suction principle of the equipment. When the old oil does not remain, the effect of new oil can give a full play
| Model | ATT-33LX |
| Power Source | AC220V |
| Maximum Power | 650W |
| Pressure Gauge | 0-1Mpa |
| Precision Filter | 5μm |
| Used Fluid Tank | 20L |
| Clean Parts | Engine Lubricating System |
| Working Temperature | -10ºC~40ºC |
| Noise | <70db |
| Weight | 40kg |
| Size | 69*49*105cm |
2. 360 degree all-round dialysis and cleaning without any dead angle.
3. Clean lubrication system, reduce engine wear, improve engine power.
4. Reduce friction resistance, decease fuel consumption and improve power.
5. Delay the oxidative thickening of engine oil under high temperature and high load, reduce exhaust pollutant emissions. .
6. Restore your car's power and make your throttle lighter and smoother.
7. Reduce fuel consumption which can save you 6%~10% fuel consumption.
2. Keep the new oil filling port clean.
3. Keep the appearance of the device clean and drain the liquid in the pipe and liquid bucket in time after each operation.
4. For the oil channel cleaning project, please use the cleaning products and tools recommended by our company to avoid damaging the oil valve and rubber seals of the system.
5. When the equipment is running, it should be placed in the horizontal position
6. During the operation of the equipment, personnel should be required to monitor the replacement.
7. After each use, the dust on the machine and the oil on the pipeline should be wiped clean
8. Cover the machine and keep it in a cool and ventilated place
9. Periodically check whether the pipe seals of the ports are good
Yantai Lift Equipment Co.,Ltd. is a joint-stock enterprise specializing in a manufacturing and marketing of Wheel alignment, Car lift, Tire changer, Wheel balancer and other auto inspection instruments. Our company has built a reputation for innovation and visionary leadership in the application of the newest technologies to automotive car service equipment.
3D Wheel Alignmennt Machine Car Lift
Tire Changer Machine Wheel Balancer Machine
|
Trade Terms |
FOB / CFR |
|
MOQ |
3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
|
Port |
QINGDAO |
|
Shipment |
BY SEA /AIR |
|
Payment Terms |
T/T |
|
Payment condition |
30% prepayment,balanced before shipment. |
|
Supply Capability |
1000units/month |
|
Sample Availability |
Yes ,But all freight(Inland freight +seafreight) covered by buyer |
|
Sample Time |
5-10days(depends on whether have in stock) |
|
Lead Time |
25-30days(Rush season 5-10days longer) |
|
Packing |
Metal frame&Carton |
|
Delivery time |
30-45days shipping time (depends on destination position) |
|
Service |
1% free parts;1year warranty after port of destination |
Q: Are you a factory ?
A: Yes, our factory with an area of 20,000 square meters, specializing in the production of car lift, wheel alignment, tire changer, wheel balancer etc, garage equipment.
Q: Can I have a visit to your company before placing an order ?
A: Sure, welcome to visit our company. There is a showroom in our factory, you can get all what you want about the auto equipment.
Q: How do you control your production quality ?
A: We have an independent QC team. Our QC teams do sample inspection, part inspection during production and 100% final inspection before each shipment.
Q: Can you produce according to the samples ?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: Can you provide the whole workshop automotive equipment ?
A: Yes, we have 8 series contains nearly all automotive equipment. Also we have helped many customers to open their automotive workshop.
Q: May I know the Lead time ?
A: The lead time of our machine is 7 to 30 days. The specific delivery time depends on the items and the quantity of your order.
Q: What is your payment terms ?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q: What is your terms of delivery ?
A: EXW, FOB, CFR, CIF, DDU, DDP
Q: How long is the warranty ?
A: Our warranty is 12 months, we will send free parts for replacement in warranty, supply spare parts for lifetime.
Q: How do you make our business long-term and good relationship ?
A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
