![[Hot Item] Semi Downdraft Bus Spray Booth Truck Paint Booth for Bus Painting](http://image.made-in-china.com/2f0j00unpEJMHWhTgN/Semi-Downdraft-Bus-Spray-Booth-Truck-Paint-Booth-for-Bus-Painting.webp)
Product Details
Basic Info.
Model NO.
IT-15-5C
Type
Coating Production Line
Certification
CE
Substrate
Steel
Brand
Infitech
Coating
Powder Coating
Airflow Direction
Cross-flow Type
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Fan Capacity
7.5kw
Air Volume
28000 M3/H
Empty Loaded Air Speed
+/- 0.3m/S
Noise
<78dB
Brightness
>1000lux
Heating Exchanger Capacity
232kw (340.000kcal/H)
Burner Model
Riello Rg5d
Voltage
380V, Your Special Voltage Is Accepted.
Transport Package
Polyfoam and Metal Frame
Specification
15000 x 5000 x 5000MM(L X W X H)
Trademark
INFITECH
Origin
China
HS Code
8419899090
Production Capacity
300 Sets Per Year
Product Description
Semi Downdraft Bus Spray Booth Truck Paint Booth For Bus Painting
Product: IT-15-5C (semi downdraft)
Basic information
| DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 15000 X 5000 X 5000mm (L X WX H) |
| External dimensions | 16620 X 5170 X 5800mm (L X WX H) |
| BASEMENT | |
| Basement design type | No base, with rear semi downdraft exhaust plenums |
| Air extraction type | Rear semi downdraft exhaust type |
| Air exhaust plenum description | Frame structure, size: 5000 X 660 X 4000mm(L X B X H) |
| Filtration area | 20m2 |
| CABIN | |
| Cabin structure | 80 x80 3.0 thick square tube frame, gantry structure Wall panel vertical insert |
| Plenum height | 800mm |
| WALL PANEL | |
| Wall panel | 60mm dual-skin insulated panels filled with heat resistant rock wool |
| Top material | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Edge material | 1.2mm galvanized plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 4 wing entry door (3+1 structure) |
| Size | 4270 X 4800mm (W X H) |
| Quantity | 1 set |
| Door descriptions | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800×2000 mm (W×H) |
| Quantity | 2 sets ***4 sets as optional |
| Door description | With safety glass observation windows |
| SIDEWALL LIGHTING | (LED lamp) |
| Quantity and power | 18 sets of light fixtures, each 4 X 18W, total 1296W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 20 sets of light fixtures, each 4X18W, total 1440W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 1000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | G3 grade pre-filter bag filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Pleated andreae filters + Fiberglass paint arrestor filters |
| Exhaust filtration | Activated carbon filter mat, M style |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Intake fan power and motor description | 7.5KW, 970rpm, 380V, 50Hz, CE |
| Parameter of Intake fan | 28,000m3/h, 650pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Exhaust fan power and motor description | 7.5KW, 970rpm, 380V, 50Hz, CE |
| Parameter of exhaust fan | 28,000m3/h, 650pa |
| Equipment empty loaded air speed | +/- 0.3m/s |
| NOISE | <78db |
| HEATING SYSTEM | |
| Heating exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
| Heating exchanger capacity | 232KW(340.000Kcal/H) |
| △T temperature increase ability | 25° C (from -5°C to 20°C, in painting phase) |
| Maximum working temperature | 80° C |
| Heating Time | 20-30 minutes (from 20° C to 60° C) in baking phase |
| Burner Model | RIELLO RG5D |
| DUCTWORK | |
| Straight ducting | 10 pieces |
| Rain hat | 1 piece |
| 90°elbow/45°elbow | 1 piece / 1 piece |
| Reducer | 2 pieces |
| Manual damper/Electric damper | 1 piece / 1 piece |
| CONTROL SYSTEM | |
| Implementation standards | Standard Y/Δ drop starting control system |
| PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
| Pressure detection | Pressure gauge indicates pressure inside the booth. |
| Power distribution facilities | CE standard electric cable, terminal box, wiring tubes and accessories |
| Features | Painting, heating painting, flash-off, baking, emergency stop switch, failure indication, baking delay stop protection, motor over-load and over-current protection, over-temperature alarm indication, fan and heating system interlock control |
| OPTIONAL | |
|
It helps fully cover around work-pieces when painting. |
|
Inverter control, energy-saving, more economical |
|
Touch screen control, easier to operate |
|
|
|
|
|
|
| SPECIAL ITEM | Rated power: 20 KW |
Detailed information
Cabin structure
- Gantry structure, rigid, stable, with high strength, asthetics
Airflow system
The semi downdraft booth has front roof intake air plenum. Fresh air enters the booth from outside the building,
ducted through the roof intake filters, and is drawn across the working chamber, over the vehicle and into the
filtered exhaust chamber at the booth rear.
Entrance door
4-wing entry doors with tempered observation window; equipped with anti sagging means
Lighting system
- Money saving energy efficient T-8 fixtures
- Sealed fixtures fitted with tempered glass
- IP55 protection grade, light fixtures fully meet EU standards
- 45 degree angled ceiling lights + horizontal sidewall lights create virtually shadow-free environment
Filtration system
| Item | Specification |
| Inlet filter | Bag filter |
| Micro-dust filter | High efficiency SP-600G |
| Floor filter | Pleated andreae filter + Fiberglass paint arrestor filter |
| Exhaust filter | Activated carbon filter mat, M type |
Clips & Hinged filter racks facilitate quick and tool-free filter replacement, improve efficiency and save labor cost
(The ceiling filter can be changed within 20 minutes, and can be completed by one man.)
Intake & Exhaust system
- Non-spark fan design perfectly conforms to EN13355-2004 requirements for the fans.
- Motor and fan are completely separated, which is compulsory requirement for fans in EN13355-2004.
- Adopting cylinder-drive paint-bake conversion damper, more quickly and accurately.
- Direct-drive fans, virtually maintenance-free
Heating system
- Heating exchange rate reaches 85%, heating time is 20-30 min after burning.
- Adopt EU standards, three-circulation duct designed with high safety and maintainability, energy-saving.
Control Board
- Control board conforms to EN60204-1-2006;
- Control order conforms to EN 13355-2004;
- Control box conforms to IP55 protection grade.
Functions:
- Fully automatic spray, bake, and cooling cycle
- Standard Y/Δ drop step-down start control system
- Over-temperature protection
- Motor overload and over-current protection
- Lights shut down automatically when baking
- Automatic control of the temperature and time
- Display of temperature
- Emergency stop switch
- Hour meter
- Magnehelic workspace pressure display
Show room
Manufacturing base
Packing and loading:
Show room
Manufacturing base
Packing and loading:
