![[Hot Item] Infitech Economical Spray Booth (IT CLASSIC 501)](http://image.made-in-china.com/2f0j00LGhfsENlatbS/Infitech-Economical-Spray-Booth-IT-CLASSIC-501-.webp)
Product Details
Basic Info.
Model NO.
IT CLASSIC 501
Substrate
Steel
Coating
Powder Coating
Airflow Direction
Fully Undershot-type
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Product Name
Infitech Economical Spray Booth (It Classic 501)
Key Word
Economical Spray Booth
Brightness
> 800lux
Empty Loaded Air Speed
+/- 0.18m/S
Voltage
380V, 50Hz, Your Special Voltage Is Acceptable
Rated Power
13kw
Noise
<78 dB
Warranty
2 Years
Transport Package
Plyfoam and Metal Frame
Specification
6900*4000*2800(mm)
Trademark
INFITECH
Origin
China
HS Code
8419899090
Production Capacity
500 Sets / Year
Product Description
Infitech Economical Spray Booth (IT CLASSIC 501)
DESIGN DIAGRAM
Basic information
| DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 6900 X 4000 X 2800mm (L X W X H) |
| External dimensions | 7005 X 5560 X 3610mm (L X W X H) |
| BASE | |
| Base design | Galvanized sheet bending forming, full grids Basement(H): 350mm, cannot be adjustable |
| Carrying capacity of the grids | 650kg /wheel |
| Filter area | 27.6m2 |
| Drive-in-ramp | 2 pieces; size: 2000 X 1030 X 320mm, diamond structure |
| Grid description | Size: 997 X 756mm, 40 X 3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
| CABIN | |
| Cabin structure | Wall panel vertical insert |
| Plenum height | 400mm |
| WALL PANEL | |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Top panel | Single layer galvanized steel plate bending forming |
| Edge material | 1.2mm galvanized steel plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 3 wing entry door (2 + 1 structure) |
| Size | 3200 X 2700 mm (W X H) |
| Quantity | Product entry door, 1 set |
| Door description | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W×H) |
| Quantity | 1 set |
| Door descriptions | With safety glass observation window |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 8 sets of light fixtures, each 4 X 18W, 576W total |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 800Lux |
| FILTRATION SYSTEM | |
| Pre-filter | G2 grade pre-filter plate filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filter | Fiberglass paint arrestor filters |
| Exhaust filter | Fiberglass paint arrestor filters, with features of big ventilation volume, small resistance and flame resistance, etc. |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970 rpm, 380V, 50 Hz, CE |
| Parameter of intake fan | 18,000 m3/h, 600pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970 rpm, 380V, 50 Hz, CE |
| Parameter of exhaust fan | 18,000 m3/h, 600pa |
| Empty loaded air speed | +/- 0.18m/s |
| NOISE | <78 db |
| HEATING SYSTEM | |
| Heat exchanger material | Stainless steel 1Gr18Ni9Ti (SUS304) |
| Heat exchanger power | 158KW |
| △T temperature increase capability | 25° C (from -5°C to 20°C, in painting phase) |
| Max. working temperature | 80° C |
| Heating time | 10-15 minutes (from 20°C to 60°C, in baking phase) |
| Burner model | RIELLO diesel burner G20 |
| DUCTWORK | |
| Pipeline configuration | Straight ducting: 4 pieces; 90°: 1 piece; 45°: 1 piece; Reducer: 1 piece |
| Manual throttle exhaust | 1 piece |
| CONTROL SYSTEM | |
| Implementation standards | Start directly |
| Features | Painting, heating painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, motor over-load and over-current protection |
| SPECIAL ITEM | Rated power: 13KW |
COMPANY INTRODUCTION
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.
