Transmission Cooler for Suzuki Jimny: High Density Foam
This transmission cooler for the Suzuki Jimny is specified around high density foam, which decides how it behaves in service far more than the part name does. We build to a written specification — base material, dimensions, finish and packing — and hold that specification on file so every reorder reproduces the approved piece.
The usual reason a programme changes supplier is not unit price. It is lead time that slipped twice before bulk started, or inconsistent hardness between lots. Both are specification problems, and both are preventable.
Specification
| Product | Transmission Cooler |
|---|---|
| Vehicle application | Suzuki Jimny |
| Material / finish | High Density Foam |
| Typical use | Track Days |
| MOQ | 2,000 pieces per specification |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | E-mark |
| Packing | 50 pieces per inner box, 500 per carton |
Material options
- Natural Rubber — the cost-effective default for volume programmes
- PU Leather — specified where the part sits close to a heat source
- Carbon Steel — specified where the part sits close to a heat source
- Magnesium Alloy — the cost-effective default for volume programmes
- Powder Coated Steel — used when the finish has to hold a coating
Processes available
- assembly line testing
- gravity casting
- surface grinding
- ultrasonic cleaning
- shot blasting
- anodising
Fitment notes
Check whether the mounting points on your market version match the catalogue drawing — regional variants are the usual cause of a wrong first order.
Where it is used
The specification above is the one most often ordered for track days. Related applications include airport ground fleets, track days, coastal delivery, long-distance touring, urban courier work.
Quality and packing
- In-line inspection with AQL 4.0 sampling on every lot.
- Dimensional report issued against the approved drawing.
- Carton marking and barcode to your specification.
- Golden sample retained at the factory as the reorder reference.
Questions buyers ask
How long does sampling take?
Samples leave the factory in 10 working days, and each revision round adds about 5 days once you have seen the first piece.
Do you handle mixed containers?
Yes. Most programmes consolidate several part numbers into one container to keep freight sensible at 2000 pieces per line.
Can you match an existing sample?
Send a sample and we will reverse-engineer the specification, then produce a counter sample for approval before any bulk starts.
What happens if a lot fails inspection?
The lot is re-inspected against the golden sample, and replacement pieces ship on the next available booking at our cost.
Share a sample or a drawing and we will quote against a written specification, not against a photograph.
