Fuel Pressure Regulator for GMC Sierra: Tempered Glass
This fuel pressure regulator for the GMC Sierra is specified around tempered glass, which decides how it behaves in service far more than the part name does. We build to a written specification — base material, dimensions, finish and packing — and hold that specification on file so every reorder reproduces the approved piece.
The usual reason a programme changes supplier is not unit price. It is reorders that did not match the approved sample, or warranty claims traced back to a single lot. Both are specification problems, and both are preventable.
Specification
| Product | Fuel Pressure Regulator |
|---|---|
| Vehicle application | GMC Sierra |
| Material / finish | Tempered Glass |
| Typical use | Long-Distance Touring |
| MOQ | 200 pieces per specification |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | IATF 16949 |
| Packing | 50 pieces per inner box, 1000 per carton |
Material options
- Natural Rubber — specified where the part sits close to a heat source
- PU Leather — the cost-effective default for volume programmes
- Brass — used when the finish has to hold a coating
- PVC Coated Fabric — the cost-effective default for volume programmes
- Powder Coated Steel — used when the finish has to hold a coating
Processes available
- powder coating
- anodising
- sintering
- surface grinding
- assembly line testing
- die casting
Fitment notes
Keep the old part until the new one is on the bench. Comparing them side by side settles questions a photograph never will.
Where it is used
The specification above is the one most often ordered for long-distance touring. Related applications include daily commuting, ride-hailing fleets, long-distance touring, off-road trails, motocross.
Quality and packing
- In-line inspection with AQL 2.5 sampling on every lot.
- Dimensional report issued against the approved drawing.
- Carton marking and barcode to your specification.
- Golden sample retained at the factory as the reorder reference.
Questions buyers ask
How long does sampling take?
Samples leave the factory in 14 working days, and each revision round adds about 5 days once you have seen the first piece.
Can you match an existing sample?
Send a sample and we will reverse-engineer the specification, then produce a counter sample for approval before any bulk starts.
How is packing specified?
Individual packing, inner box quantity and carton marking are confirmed at quotation stage so the cartons arrive ready for your warehouse.
What happens if a lot fails inspection?
The lot is re-inspected against the golden sample, and replacement pieces ship on the next available booking at our cost.
Send the specification you are working to and we will confirm what we can match, what we would change and why.
