Ignition Coil for Volvo XC60: Natural Rubber
This ignition coil for the Volvo XC60 is specified around natural rubber, which decides how it behaves in service far more than the part name does. We build to a written specification — base material, dimensions, finish and packing — and hold that specification on file so every reorder reproduces the approved piece.
The usual reason a programme changes supplier is not unit price. It is packing that arrived crushed at the port, or inconsistent hardness between lots. Both are specification problems, and both are preventable.
Specification
| Product | Ignition Coil |
|---|---|
| Vehicle application | Volvo XC60 |
| Material / finish | Natural Rubber |
| Typical use | Long-Distance Touring |
| MOQ | 3,000 pieces per specification |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | E-mark |
| Packing | 10 pieces per inner box, 500 per carton |
Material options
- Magnesium Alloy — used when the finish has to hold a coating
- Bronze — the cost-effective default for volume programmes
- High Density Foam — selected when the part is exposed to weather and road salt
- Sintered Metal — preferred when weight matters more than rigidity
- Semi-Metallic Compound — specified where the part sits close to a heat source
Processes available
- ultrasonic cleaning
- powder coating
- rubber vulcanisation
- sintering
- assembly line testing
- gravity casting
Fitment notes
Confirm the fitment against the VIN or the frame number before ordering; two model years often share a name and not a part.
Where it is used
The specification above is the one most often ordered for long-distance touring. Related applications include coastal delivery, off-road trails, track days, delivery fleets, airport ground fleets.
Quality and packing
- In-line inspection with AQL 1.5 sampling on every lot.
- Dimensional report issued against the approved drawing.
- Carton marking and barcode to your specification.
- Golden sample retained at the factory as the reorder reference.
Questions buyers ask
How long does sampling take?
Samples leave the factory in 14 working days, and each revision round adds about 3 days once you have seen the first piece.
What is the minimum order quantity?
The standard MOQ is 3000 pieces per specification. Mixed sizes inside one shipment are accepted once the total reaches that figure.
How is packing specified?
Individual packing, inner box quantity and carton marking are confirmed at quotation stage so the cartons arrive ready for your warehouse.
Can you match an existing sample?
Send a sample and we will reverse-engineer the specification, then produce a counter sample for approval before any bulk starts.
Tell us the model, the fitment and the quantity and we will hold a production slot for you.
