Dash Cam for Tesla Model 3 — Fitment Guide
Dash Cam on the Tesla Model 3 is one of the few items where the specification is not a matter of taste. This fitment guide covers what has to be checked before the part is bought, what the installation actually involves, and what has to be documented for the vehicle to stay insurable and road legal in your market.
Failures here are rarely dramatic. They are reorders that did not match the approved sample, or inconsistent hardness between lots — the kind of problem that shows up at the worst possible moment.
Specification
| Item | Dash Cam |
|---|---|
| Vehicle application | Tesla Model 3 |
| Focus | Fitment Guide |
| Base material | Titanium Alloy |
| MOQ | 2,000 pieces per specification |
| Sampling | 7 working days, 3 days per revision |
| Compliance | ISO 9001 |
What to check before buying
- Fitment — confirm the model year and market version of the Tesla Model 3 before ordering.
- Compliance — ISO 9001 documentation should be issued with the shipment, not after it.
- Material — Titanium Alloy is the base; substitution is a new approval, not a small change.
- Installation — check whether the vehicle wiring or trim has to come out first.
- Documentation — keep the test report with the vehicle record.
Installation notes
- Disconnect the battery before any wiring work.
- Route cables away from moving parts and heat sources.
- Test the function before the trim goes back on.
- Record the installation date and the part number in the vehicle file.
- Re-check after the first week of use.
Maintenance and inspection
- Visual check every service interval.
- Function test after any electrical work on the vehicle.
- Replace at the first sign of intermittent operation.
- Keep the approved sample part number on the maintenance record.
Related safety items
Programmes that specify dash cam usually cover seat belt buckle, car black box, speed bump, road cone at the same time.
Questions buyers ask
Can you match an existing sample?
Send a sample and we will reverse-engineer the specification, then produce a counter sample for approval before any bulk starts.
Do you handle mixed containers?
Yes. Most programmes consolidate several part numbers into one container to keep freight sensible at 2000 pieces per line.
How long does sampling take?
Samples leave the factory in 7 working days, and each revision round adds about 3 days once you have seen the first piece.
How is packing specified?
Individual packing, inner box quantity and carton marking are confirmed at quotation stage so the cartons arrive ready for your warehouse.
Tell us the model, the fitment and the quantity and we will hold a production slot for you.
