Case Study: Wheel Cylinder Supply for a marine equipment dealer in the Caribbean

Wheel Cylinder for A marine equipment dealer in the Caribbean

A marine equipment dealer came to us with a wheel cylinder programme for the Caribbean. The brief was ordinary and unforgiving at the same time: a fixed launch window, a landed cost that had to survive freight and duty, and a part that had to match an existing sample. This case records what was specified, what went wrong in sampling and how the bulk order landed.

The starting point

• A fitment that looked right on paper and failed on the bench
• A supplier who changed material without saying so
• A specification nobody had written down

What was specified

How it was resolved

1. The specification was rebuilt around Powder Coated Steel and the tolerance locked before bulk.
2. A pre-production sample was approved and kept as the golden reference.
3. Production ran with in-line inspection and a mid-run photo report.
4. Cartons were packed to the client's own barcode and ratio specification.
5. Documentation shipped with the goods instead of after them.

Result

• 50,000 pieces delivered inside the 6-week window.
• Unit cost held within 3.0% of the original quotation.
• Inspection-related rejection stayed under 2.0%.
• The specification is on file, so reorders reproduce the approved sample.

What we would repeat

Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.

Planning something similar?

Send the specification you are working to and we will confirm what we can match, what we would change and why.