Case Study: License Plate Frame Supply for a taxi fleet in South Asia
Source:Case /
Time:2026-09-18
License Plate Frame for A taxi fleet in South Asia
A taxi fleet came to us with a license plate frame programme for South Asia. The brief was ordinary and unforgiving at the same time: a fixed launch window, a landed cost that had to survive freight and duty, and a part that had to match an existing sample. This case records what was specified, what went wrong in sampling and how the bulk order landed.
The starting point
- Inconsistent hardness between lots
- A fitment that looked right on paper and failed on the bench
- A supplier who changed material without saying so
What was specified
| Part | License Plate Frame |
|---|---|
| Client | A taxi fleet |
| Market | South Asia |
| Volume | 2,000 pieces across 4 specifications |
| Base material | Ceramic Composite |
| Sampling rounds | 4 |
| Delivery window | 10 weeks from PO to ex-factory |
| Compliance | E-mark |
How it was resolved
- The specification was rebuilt around Ceramic Composite and the tolerance locked before bulk.
- A pre-production sample was approved and kept as the golden reference.
- Production ran with in-line inspection and a mid-run photo report.
- Cartons were packed to the client's own barcode and ratio specification.
- Documentation shipped with the goods instead of after them.
Result
- 2,000 pieces delivered inside the 10-week window.
- Unit cost held within 2.0% of the original quotation.
- Inspection-related rejection stayed under 1.5%.
- The specification is on file, so reorders reproduce the approved sample.
What we would repeat
Keep one accountable owner on both sides. Most delays come from hand-offs, not from machines.
Planning something similar?
Ask for the current catalogue and the specification sheet for this line.
