Case Study: Idle Control Valve Supply for a regional distributor in East Africa

Idle Control Valve for A regional distributor in East Africa

A regional distributor came to us with a idle control valve programme for East Africa. The brief was ordinary and unforgiving at the same time: a fixed launch window, a landed cost that had to survive freight and duty, and a part that had to match an existing sample. This case records what was specified, what went wrong in sampling and how the bulk order landed.

The starting point

• A supplier who changed material without saying so
• Inconsistent hardness between lots
• Reorders that did not match the approved sample

What was specified

How it was resolved

1. The specification was rebuilt around Natural Rubber and the tolerance locked before bulk.
2. A pre-production sample was approved and kept as the golden reference.
3. Production ran with in-line inspection and a mid-run photo report.
4. Cartons were packed to the client's own barcode and ratio specification.
5. Documentation shipped with the goods instead of after them.

Result

• 2,000 pieces delivered inside the 10-week window.
• Unit cost held within 4.5% of the original quotation.
• Inspection-related rejection stayed under 0.5%.
• The specification is on file, so reorders reproduce the approved sample.

What we would repeat

Lock the material standard before sampling. Once the base changes, every downstream approval has to be redone and the calendar slips.

Planning something similar?

Share a sample or a drawing and we will quote against a written specification, not against a photograph.